published date : may 22,2005 drawing no :xdsa2355 v4 checked : b.l.liu p.1/3 www .sunled.com part number : XLUY34D t-1 (3mm) solid state lamp notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. features low power consumption. popular t-1 diameter package. general purpose leads. reliable and rugged. long life - solid state reliability. available on tape and reel. rohs compliant. part number emitting color emitting material lens-color luminous intensity (if=10ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. XLUY34D yellow gaasp/gap yellow diffused 1.8 5 590 60 absolute maximum ratings (t a =25c ) ) ) ) uy (gaasp/ gap) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 140 ma power dissipation p t 105 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 lead solder temperature [2mm below package base] 260c for 3 seconds lead solder temperature [5mm below package base] 260c for 5 seconds operating characteristics (t a =25c ) ) ) ) uy (gaasp/ gap) unit forward voltage (typ.) (i f =10ma) v f 1.95 v forward voltage (max.) (i f =10ma) v f 2.5 v reverse current (v r =5v) i r 10 ua wavelength of peak emission (i f =10ma) p 590 nm wavelength of dominant emission (i f =10ma) d 588 nm spectral line full width at half-maximum (i f =10ma) ? 35 nm capacitance (v f =0v, f=1mhz) c 20 pf
published date : may 22,2005 drawing no :xdsa2355 v4 checked : b.l.liu p.2/3 www .sunled.com part number : XLUY34D t-1 (3mm) solid state lamp remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters. uy
published date : may 22,2005 drawing no :xdsa2355 v4 checked : b.l.liu p.3/3 www .sunled.com part number : XLUY34D t-1 (3mm) solid state lamp XLUY34D
|